Wooden Toys Wholesalers Introduces The Use Of Toy Materials 2022-5-17 Wooden Toys Wholesalers introduce toy materials: 1. Pine: Lighter, whiter, with larger wood grains, it is easier to crack than other woods. 2. Lotus wood: It is most often used as wooden toys. The price is higher than that of pine wood. Basswood: Beige, light in weight, no wood grain, fall-resistant, more expensive than the previous two. 3. Basswood plywood: easy to cut, often used to make wooden puzzles. 4. MDF: MDF, easy to cut, brown, commonly used in the water-mixed (painted) part of wooden toys, and the price is cheap. 5. Beech: The texture is uniform, and the cross-section is a bit like rice grains. Bit by bit, the price is higher than that of lotus, and it is also resistant to falling. 6. Rubberwood: Toys made of this wood are mostly exported, mainly for children of very young ages. They feel very good and safe. Through the above introduction, Wooden Decorations Wholesalers hopes that you can simply refer to the content of this article in future use. https://www.wooden-crafts.net/

Wooden Puzzle Exporter Introduces The Production Requirements Of Wooden Toy Cars 2022-4-21 Wooden Puzzle Exporter introduces how to make wooden toy cars: 1. First, prepare small saws, nails, glue, as well as rectangular and round wooden blocks. 2. Saw the front part of the small rectangular wooden block, cut it into a pointed shape, and then stack a layer of smaller wooden blocks on it and stick it with glue. This can be used as the body. 3. Then use the round wood as a tire, take care to remove the outer skin of the wood, put on the small nails, cut the round wood into thin slices, add a rectangular bar in the middle, and fix the tire. The tires can turn. 4. After that, assemble the finished tires to the finished body, assemble them, and then simply draw the windows, lights and doors with a water-based pen, and a simple wooden toy car is ready. Through the above introduction, Wooden Jewelry Wholesalers hopes that you can simply refer to the content of this article in future use. https://www.wooden-crafts.net/

Wooden Toys Suppliers Introduces The Drying Requirements Of Wooden Products 2022-3-17 Wooden Toys Suppliers introduces the drying process of wooden products: 1. Artificial drying: The wood is sealed in a steam drying room, and the steam is used to promote the evaporation of water to dry the wood. (According to the size and thickness of the wood, for example, the drying time of 4cm board generally takes one week), the maximum drying degree can make the wood moisture content only reach 3%, but after high temperature evaporation, the wood becomes brittle and loses its toughness and is easily damaged without damage. Good for carving furniture. Usually the degree of drying of logs should be kept at about 30% moisture content. 2. Natural drying: The wood is classified and placed in a ventilated place (plank, square or log), placed in a stack, and the bottom of the stack is about 60cm off the ground, leaving a gap in the middle to allow air circulation, take away moisture, and gradually dry the wood. Natural drying generally takes several years or months to achieve certain drying requirements. Through the above introduction, Wooden Decorations Suppliers hopes that you can simply refer to the content of this article in future use. https://www.wooden-crafts.net/