Wooden Toys Suppliers Introduces The Drying Requirements Of Wooden Products 2022-3-17 Wooden Toys Suppliers introduces the drying process of wooden products: 1. Artificial drying: The wood is sealed in a steam drying room, and the steam is used to promote the evaporation of water to dry the wood. (According to the size and thickness of the wood, for example, the drying time of 4cm board generally takes one week), the maximum drying degree can make the wood moisture content only reach 3%, but after high temperature evaporation, the wood becomes brittle and loses its toughness and is easily damaged without damage. Good for carving furniture. Usually the degree of drying of logs should be kept at about 30% moisture content. 2. Natural drying: The wood is classified and placed in a ventilated place (plank, square or log), placed in a stack, and the bottom of the stack is about 60cm off the ground, leaving a gap in the middle to allow air circulation, take away moisture, and gradually dry the wood. Natural drying generally takes several years or months to achieve certain drying requirements. Through the above introduction, Wooden Decorations Suppliers hopes that you can simply refer to the content of this article in future use. https://www.wooden-crafts.net/