Hose Fittings Suppliers Introduces The Cleaning Details Of Hydraulic Pipe Joints Hose Fittings Suppliers introduces the principle of hydraulic pipe fittings: 1. Introduction of hydraulic pipe joints: hydraulic pipe joints are a connection component, a connection joint between high-pressure oil pipes and high-pressure oil pipes. Pipe joints, high-pressure ball valves, etc. 2. The principle of hydraulic pipe joints: different types of joints have different principles. Here is a small editor to introduce the relevant principles of welded pipe joints. Welded pipe joints are welded as the name suggests, and the joints and the pipes are in a circular shape. seal. The structure of this pipe joint is relatively simple, the manufacturing cost is not high, it is relatively easy to manufacture, and the sealing performance is good. It's just that the welding quality is very demanding, and it is inconvenient to install and disassemble. 3. Cleaning of hydraulic pipe joints: There are two types of cleaning of hydraulic pipe joints: kerosene cleaning and pickling. Kerosene cleaning is mainly for copper pipes and stainless steel pipes. First, remove the pipes and joints to be cleaned, and use a cloth to moisten them with kerosene. Clean the viewing scene in the internal test, and then directly soak the ends and joints in kerosene for cleaning. The standard after cleaning is that there should be no visible contaminants. Pickling is mainly for steel pipes with severe corrosion. First, degreased, washed with water, then derusted, and then neutralized with lye. Be careful not to wash the marks on the pipes. Through the above introduction, Hydraulic Fittings Suppliers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/