Bite Type Tube Fittings Manufacturers Introduces The Use Of Metal Hoses 2022-5-16 Bite Type Tube Fittings Manufacturers introduces metal hose products including oil suction hose, steam hose, sandblasting hose, acid and alkali suction hose, food hose, oxygen blowing hose and various special-shaped hoses. Widely used in machinery, chemical, petroleum, metallurgy, food and other industries. What is the pressure range of the pressure-resistant metal hose: the pressure range of the hose is generally PN0.6-32.0Mpa. Up to 42.0MPa. The metal hose is the main pressure-bearing part of the hose installed in the pressure pipeline, and at the same time acts as a sheath for the bellows. According to the pressure in the pipeline and the application site, one or more layers of stainless steel wire or steel belt can be selected. Weaving. Features: Corrosion resistance, high temperature resistance (about 200 ℃, > 260 ℃ will affect the service life), low temperature resistance, light weight, small size, good flexibility. Corrugated metal hose (abbreviated as corrugated pipe) is a flexible pipe in modern industrial pipelines. It is mainly composed of bellows, mesh sleeves and joints. Its inner tube is a thin-walled stainless steel corrugated tube with a spiral or annular waveform, and the mesh sleeve on the outer layer of the corrugated tube is woven from stainless steel wire or steel strip according to certain parameters. The fittings or flanges at both ends of the hose are matched to the fittings or flanges of the customer's pipeline. The corrugated metal hose is generally composed of three parts: corrugated pipe, mesh sleeve and joint. The corrugated pipe is the body of the metal hose and plays a flexible role; the mesh sleeve plays the role of strengthening and shielding; the joint plays the role of connection. For different use requirements, the way they are connected to each other is different: the three parts of the bellows, the mesh sleeve and the joint are connected by welding, which is called welding type; connected by mechanical clamping, called mechanical clamping type; In addition, there is a combination of the above two methods, called hybrid. Through the above introduction, BSP Thread Fittings Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/

Steel Hose Fittings Manufacturers Introduce The Details Of The Use Of Metal Hose Fittings 2022-4-19 Steel Hose Fittings Manufacturers introduces the common types of metal hose fittings? 1. External threaded joint: mainly used for the connection between the local junction box and the hose. Open a hole in the local box, insert the connector, and fix it with a lock nut. 2. Internal thread joint: mainly used for the screw connection of cable tube and hose. 3. Card sleeve type joint: It is mainly used for the connection between metal hose and steel pipe. The installation of the card sleeve joint does not need to be threaded on the steel pipe. 4. Plug-in joint: mainly used for pre-embedded pipes with small dense gap, inserted into the inner diameter of steel pipes, and easy to install. 5. Reducer joint: It is mainly used in the case that the diameter of the steel pipe and the metal hose is inconsistent, and it can be arbitrarily enlarged or reduced according to the requirements of on-site installation. Through the above introduction, Hydraulic Adapters Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/

Hydraulic Adapters Suppliers Introduces The Use Characteristics Of Elbows 2022-2-11 Hydraulic Adapters Suppliers introduces the characteristics of elbows and elbows: 1. The price of the elbow is higher than that of the elbow, but the cost performance is much higher than that of the elbow. It is well known that the elbow without anti-corrosion treatment is easy to damage, but it is very cheap and used in some projects that are not very demanding. many. 2. The material of the elbow includes cast iron, stainless steel, alloy steel, forgeable cast iron, carbon steel, non-ferrous metals, and plastics. The connection with the pipe includes direct welding (the most commonly used method) flange connection, thread connection, and Socket connection, etc. 3. Elbow elbow symbol: schxx is the wall thickness grade, 90e(s) means short radius 90 degree elbow; 90e(l) means long radius 90 degree elbow; 45e(l) means long radius 45 degree elbow; 45e(s) means short radius 45 degree elbow; 180e(s) means short radius 180 degree elbow; 180e(l) means long radius 180 degree elbow; r(c) means concentric reducer; r(e) Means eccentric reducing joint; t(s) means equal diameter tee; t(r) means equal diameter tee; cr(s) means equal diameter cross; cr(r) means reducing cross; c means pipe cap ; The classification method of elbows, according to its radius of curvature, can be divided into long radius elbows and short radius elbows. Through the above introduction, Hollow Hex Plug Suppliers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/

Stainless Steel Hose Fittings Manufacturers Introduces The Requirements For The Use Of Hose Joint Seals Stainless Steel Hose Fittings Manufacturers introduce In the hydraulic system of the main engineering machinery product, the common oil ports that cooperate with Hose Fittings have the following types: 3.1 O-ring seal with 15° internal chamfered oil port structure with counterbore groove on metric, American and British threaded column ends The 15° internal chamfered oil port type is more commonly used in the design of the pump (executor) and motor (power unit) oil inlet and outlet ports in the hydraulic pipeline, as shown in Figure 1. The thread form is produced by the pump and the motor. Manufacturers connect according to different standards, metric thread (ISO 6149-1 standard), American unified thread (ISO 11926-1 standard), and inch pipe thread (JIS B2351 standard). The sealing form is O-ring sealing. 3.2 Metric and inch threaded column end elastic sealing ring or metal-to-metal sealing flat oil port structure This kind of oil port is commonly used in the design of statically sealed oil inlet and outlet ports such as valves, confluence blocks, and pumps in hydraulic pipelines, as shown in Figure 2. The machining process is relatively simple compared to the 15° internal chamfering of the oil port, but after the internal thread is processed, the oil port is flattened with a shallow sink to ensure the verticality requirements between the pipe joint and the oil port sealing surface, so that the pipe joint and the ED The gasket and the countersink plane of the oil port are completely attached to form a seal and reduce the leakage of the connecting surface. According to different standards, manufacturers of flat oil ports have metric threads (GB/T 19674.1 standard) and inch pipe threads (ISO1179-1 standard) for connection. The sealing form is sealed by ED elastic sealing ring, or with pipe joints and oil. The sharp corners between the mouths are sealed. 3.3 British tapered pipe thread seal, American NPT tapered pipe threaded port structure (1) Inch 55° threaded cone pipe thread sealing oil port structure: also called threaded oil port, as shown in Figure 3. The limit size and tolerance of this thread meets the requirements of GB/T 7306. When connecting with pipe joints, no packing or sealing medium is required to prevent leakage. The connection of conical internal thread oil and conical external thread joints can be used under high temperature and high pressure. use; (2) U.S.-made 60° tooth-shaped pyramid pipe threaded NPT seal oil port structure: as shown in Figure 3, the limit size and tolerance comply with GB/T 12716 regulations, which are mainly used for fuel and lubricating oil pipeline joints, and at the same time It is also suitable for high temperature and high pressure systems. For more product information, please click here: Metric Thread Fittings. https://www.cnshunda.com/

Hose Fittings Suppliers Introduces The Cleaning Details Of Hydraulic Pipe Joints Hose Fittings Suppliers introduces the principle of hydraulic pipe fittings: 1. Introduction of hydraulic pipe joints: hydraulic pipe joints are a connection component, a connection joint between high-pressure oil pipes and high-pressure oil pipes. Pipe joints, high-pressure ball valves, etc. 2. The principle of hydraulic pipe joints: different types of joints have different principles. Here is a small editor to introduce the relevant principles of welded pipe joints. Welded pipe joints are welded as the name suggests, and the joints and the pipes are in a circular shape. seal. The structure of this pipe joint is relatively simple, the manufacturing cost is not high, it is relatively easy to manufacture, and the sealing performance is good. It's just that the welding quality is very demanding, and it is inconvenient to install and disassemble. 3. Cleaning of hydraulic pipe joints: There are two types of cleaning of hydraulic pipe joints: kerosene cleaning and pickling. Kerosene cleaning is mainly for copper pipes and stainless steel pipes. First, remove the pipes and joints to be cleaned, and use a cloth to moisten them with kerosene. Clean the viewing scene in the internal test, and then directly soak the ends and joints in kerosene for cleaning. The standard after cleaning is that there should be no visible contaminants. Pickling is mainly for steel pipes with severe corrosion. First, degreased, washed with water, then derusted, and then neutralized with lye. Be careful not to wash the marks on the pipes. Through the above introduction, Hydraulic Fittings Suppliers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/

Hydraulic Fittings Manufacturers Introduces The Strategy Of Hose Corrosion Treatment Hydraulic Fittings Manufacturers introduces the causes of hose corrosion The metal reacts with oxygen in the atmosphere to form an oxide film on the surface. The iron oxide formed on the ordinary carbon steel continues to oxidize, causing the corrosion to continue to expand, and finally to form holes. It is possible to use paint or oxidation-resistant metals (for example, zinc, nickel, and chromium) for electroplating to ensure the surface of carbon steel, but, as people know, this protection is only a thin film. If the protective layer is damaged, the steel below will begin to rust. The corrosion resistance of stainless steel hose depends on the content of chromium. When the addition of chromium is 10.5%, the atmospheric corrosion resistance of steel is significantly increased, but when the content of chromium is higher, although the corrosion resistance can still be improved, it is not obvious . The reason is that when steel is alloyed with chromium, the type of surface oxide is changed to a surface oxide similar to that formed on pure chromium metal. This tightly adhered chromium-rich oxide protects the surface and prevents further oxidation. This oxide layer is extremely thin, and the natural luster of the stainless steel surface can be seen through it, giving the stainless steel a unique surface. Moreover, if the surface layer is damaged, the exposed steel surface will react with the atmosphere to repair itself, re-form this "passivation film" and continue to protect it. Through the above introduction, Hollow Hex Plug Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/

Hollow Hex Plug Suppliers Introduces The Use Characteristics Of Bsp Thread Fittings Hollow Hex Plug Suppliers introduce Features of Bsp Thread Fittings : 1. The joint has high strength and good ductility, which can give full play to the strength and ductility of the steel base material. The joint performance meets the JGJ107-2003 grade I joint standard and can be broken from the base material. 2. The connection is convenient, fast, and easy to operate. 3. Convenient and intuitive detection. 4. The straight thread of the steel bar can be prefabricated, and the sleeve can be produced in a factory, which does not take up the construction period and has high processing efficiency. 5. No electricity, no gas, no open flame operation, no oil leakage, and no pollution during the construction connection. It can be constructed all-weather. 6. It has strong applicability and can be operated flexibly in densely arranged steel bars in a small site. 7. It can connect horizontal, vertical, and oblique HRB335 and HRB400 steel bars with the same diameter or different diameters. https://www.cnshunda.com/

Brass Hose Fittings Supplier Introduces The Details Of Fittings Brass Hose Fittings Supplier introduces the relevant knowledge of pipe fittings: 1. There are many materials for pipe fittings, such as paper, PVC, 20# steel, 201, 304, and so on. The compressive strength, corrosion resistance, high-temperature resistance, and economy of different pipe fittings are different, depending on the specific use environment. 2. Pipe fittings are parts that connect pipes into pipelines. According to the connection method, it can be divided into four categories: socket pipe fittings, threaded pipe fittings, flange pipe fittings, and welded pipe fittings. It is mostly made of the same material as the pipe. There are elbows (elbows), flanges, three-way pipes, four-way pipes (crossheads), and reducers (small and small heads). 3. The elbow is used where the pipe turns; the flange is used to connect the pipe and the pipe to each other, connected to the pipe end, the three-way pipe is used for the place where the three pipes are collected; the four-way pipe is used for the place where the four pipes are collected; The reducer is used where two pipes of different diameters are connected. www.cnshunda.com

Brass Hose Fittings Manufacturers Introduces How To Use Waterproof Fittings Brass Hose Fittings Manufacturers Introduces in real production and life, if there is a connector that is safer and more energy-saving than ordinary plugs, and has a higher cost performance, would you choose to buy it? It is a waterproof connector. Compared with ordinary joints, waterproof joints have the following advantages: 1. The waterproof connector is more cost-effective. In fact, the price of waterproof connectors is not much higher than that of ordinary connectors, so in other words, we used a price similar to that of ordinary connectors, but bought a product with higher safety performance, so the price-performance ratio is also There has been a substantial improvement. So when pursuing cost-effectiveness, we should consider this the product is much better than ordinary joints. 2. The safety factor of the waterproof joint is higher. In daily life, there are some damp conditions that are unavoidable, so at this time, some electricity accidents may be triggered due to too much humidity, which is very unfavorable for the safety of our family members, and use Waterproof joints can greatly reduce this hidden danger. So from a security perspective, We should choose to buy waterproof connectors. 3. Waterproof joints can reduce the waste of line docking, make the docking more effective and safer, so as to reduce manual back and forth repairs. https://www.cnshunda.com/product/hose-connector-1/hose-fittings1.html

Hydraulic Fittings Company Introduces The Classification Of Pipe Fittings Hydraulic Fittings Company introduces the classification of pipe fittings: 1. The pipe fittings used to connect the pipes are: flanges, unions, pipe clamps, clamps, ferrules, hose clamps, etc. 2. Fittings that change the direction of the pipe: elbows, elbows 3. Fittings that change the diameter of the pipe: reducing diameter (reducing pipe), reducing elbow, branch pipe stand, reinforcing pipe 4. Increase the pipe fittings of the pipeline branch: three-way, four-way 5. Pipe fittings used for pipeline sealing: gaskets, raw material belts, hemp, flange blind plates, pipe plugs, blind plates, heads, welding plugs 6. Pipe fittings used for pipeline fixing: snap ring, towing hook, lifting ring, bracket, bracket, pipe clamp, etc. Through the above introduction, Hydraulic Adapters Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.cnshunda.com/