Seersucker Fabric Manufacturers Introduces The Strategy Of Using Bronzing Process Seersucker Fabric Manufacturers introduced the characteristics of hot stamping. It is a special printing process that does not require ink. The so-called hot stamping refers to the process of hot stamping electrochemical aluminum foil onto the surface of the substrate under a certain temperature and pressure. The hot stamping machine completes the hot stamping process. equipment. The process is mainly based on the principle of hot-press transfer. Under the action of combined pressure, the anodized aluminum is in contact with the hot stamping plate and the substrate. The hot stamping plate has a certain amount of heat due to the heating of the electric heating plate. The hot-melt dyed resin layer and adhesive are melted by the heating of the anodized aluminum, and the dyed resin layer is viscous. After the special heat-sensitive adhesive melts, the viscosity increases. The aluminum layer and the anodized aluminum base film are peeled off and transferred to the substrate at the same time. As the pressure is removed, the adhesive quickly cools and solidifies, and the aluminum layer firmly adheres to the substrate. Finish a hot stamping process on the top. The process flow of the bronzing machine: bronzing preparation→plate loading→pad plate→determination of bronzing process parameters→trial bronzing→signing sample→formal bronzing. The images and texts printed by anodized aluminum present a strong metallic luster, bright and eye-catching, and never fade. In particular, gold and silver electrochemical aluminum, with its magnificent, exquisite and elegant decoration, embellishes the surface of the printed matter, enhances the artistry of the printed matter, and plays a publicity effect that highlights the theme; its brightness greatly exceeds that of printed gold and silver, making the product It has a high-end feeling and a beautiful enjoyment. At the same time, due to the excellent physical and chemical properties of anodized aluminum, it can protect the printed products, so the hot stamping process is widely used in high-end and exquisite packaging and decoration trademarks, wall calendars, book covers and other printed materials; secondly, anodized aluminum hot stamping The range is very wide, from general book covers, trademark patterns, advertising, plastic products to daily necessities, from paper to leather, cotton, etc.; furthermore, bronzing is a dry processing method, and the workpiece can be packaged and transported immediately after bronzing . Through the above introduction, 3D Embossed Fabric Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/