Home Textile Fabrics Supplier Introduces How To Use Seersucker 2022-12-14 Seersucker is a cotton fabric with a special appearance and style, which is processed from light muslin. The cloth surface is evenly covered with uneven small bubbles, which are not close to the body when wearing and have a cool feeling, suitable for all kinds of women's summer clothing. Clothes made of seersucker have the advantage that they do not need to be ironed after washing, but the disadvantage is that after repeated washing, the bubbles will gradually flatten. Especially when washing, it is not advisable to soak in hot water, and it is not advisable to scrub and twist vigorously Without affecting the bubble fastness. Below, Home Textile Fabrics Supplier introduces the processing method of seersucker: 1. If the warp or weft yarns separated by polyester and cotton are used for weaving and treated with sodium hydroxide solution, the cotton fiber shrinks more than the polyester fiber, so that the cloth body forms concave and convex bubbles; another example is the use of high-shrinkage polyester and ordinary polyester. Arranged into spacers in the warp or weft, and processed by heat treatment, the cloth body forms concave-convex bubbles due to the different shrinkage rates of the two fibers. 2. The raw material of seersucker is pure cotton or polyester/cotton yarn, and the density of the bubble wrap is greater than that of the ground warp, or the bubble warp is made of strands, and the ground warp is made of a single yarn. When weaving, the let-off amount of the bubble wrap is larger than that of the ground warp, and then dyed and finished loosely processed the cell warp to form beautiful and uneven bubbles. Using the principle that the diameter of cotton fibers increases and the length is shortened when they encounter concentrated lye. Through the above introduction,Dyeing Fabric Company hopes that you can simply refer to the content of this article in future use. www.haiwei-hometextile.com

Waterproof Fabric Supplier Introduces The Relevant Knowledge Of Polyester Fabrics 2022-7-14 Polyester, an important variety in synthetic fibers, is the trade name of polyester fiber. A fiber-forming polymer prepared from refined terephthalic acid (PTA) or dimethyl terephthalate (DMT) and ethylene glycol (EG) through esterification or ester exchange and polycondensation reactions ——Polyethylene terephthalate (PET), a fiber made by spinning and post-processing. Below, Waterproof Fabric Supplier introduces the advantages of polyester fabrics: 1. Good chemical resistance, little damage to it by acid and alkali, and it is not afraid of molds and insects. 2. The synthetic fiber fabric has a good heat resistance and thermoplasticity. 3. High strength and elastic recovery ability, strong and durable, anti-wrinkle and non-ironing characteristics. 4. Good light resistance, comparable to acrylic fabrics. Through the above introduction, Seersucker Fabric Supplier hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

China Printing Fabric Factory Introduces How To Clean Waterproof Clothes 2022-5-16 China Printing Fabric Factory introduces how to properly clean waterproof fabric clothes: 1. The waterproof fabric is more resistant to dirt, add some detergent to the water, soak it for 10 minutes, then gently with your hands for a few minutes, and finally rinse it twice.Just dry in the shade. 2. The blue cloth dyed with vulcanized fuel generally has strong adhesion but poor abrasion resistance. Therefore, it is best to soak in the detergent for 15 minutes, gently scrub with your hands, and then use water rinsing. Do not rub with a washboard to prevent the cloth from turning white. 3. The blue cloth dyed with oxidative fuel is generally dyed firmly and shiny, but it is easy to turn green when encountering reducing gases such as gas. So, don't put the washed blue cloth clothes on the stove to bake. 4. If the waterproof clothing is a waterproof fabric with a coating, it generally does not need to be washed frequently. If it is not too dirty, it is enough to scrub with a hot and humid towel. Wipe a few times and twist the towel again.It can be cleaned after several times. If the inside is also dirty, you can use the handwashing method, put it in the bathtub, add more warm water, dish soap, or dishwashing detergent, and wash it a lot. then thoroughly bottom of the clean foam water, and finally put it in the washing machine to dehydrate. Through the above introduction,China Dyeing Fabric Suppliers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

Characteristics Of Patterns Of Printing Fabric 2022-3-16 Generally, for printing, the fabric must be shrunk first and then printed afterward. Otherwise, printing first and then shrinking will cause color damage to the printing color and uneven shrinkage and deformation of the pattern. Processing and printing later, so that the fabric will achieve the effect we want. The advantages of Printing Fabric : The patterns of printed cloth are various and beautiful, which solves the problem of only solid color cloth without printing in the past. It greatly enriches people's enjoyment of material life, and printed cloth is widely used, not only can be worn as clothing but also can be mass-produced. High quality and low price, ordinary people can basically afford it, and they are loved by them. Through the above introduction, China 3D Embossed Fabric Suppliers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

3D Embossed Fabric Suppliers Introduces The Details Of Fabric Embossing 2022-2-17 Fabric embossing is a commonly used method of fabric decoration in the fabric processing industry. Different from other fabric decoration methods, fabric embossing uses fabric deformation to make the fabric show different patterns and patterns. The advantage of this is that the pattern Long lasting and does not fade with washing etc. The processing method similar to fabric embossing is the fabric printing process. The following 3D Embossed Fabric Suppliers will introduce the main differences between the two processing methods. Embossing adopts steel plates or rollers engraved with different patterns to emboss patterns on the leather surface or simulate the grain pattern of some animal skins to cover up the original grain defects of the leather, improve the appearance and beautify, and increase the use value. There are plate type and roller type. The form of the plate embossing machine is the same as that of the plate ironing machine, including a heated upper plate with a pattern and a felt-covered lower plate. Through the pressing action of the upper and lower plates in contact, the pattern is pressed out of the leather surface placed therebetween. The equipment is composed of a heating roller with a pattern and a lower pressing roller, and the leather is pressed out of the pattern when it passes between the two rotating rollers. In terms of production process, cloth embossing is to coat a layer of silica gel on the surface of the cloth, then put it on the mold, and then heat it by an embossing machine, while printing is to print the pattern on the cloth with pigments or dyes; visual On the top, the embossing is pressed by an embossing machine, so the surface is uneven and has a three-dimensional sense, while the printing is only printed with a pattern on it, and the pattern is flat and has a flat sense; There are bumps, it feels tactile, and the printing feels smoother. So, combining these factors, it is actually very easy to distinguish. Through the above introduction, Pigment Printing Fabric Suppliers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

China Washed Cotton Fabric Company Introduces The Details Of The Use Of Mesh Cloth China Washed Cotton Fabric Company introduces the definition of mesh cloth, the function of mesh cloth, and the fabric with mesh-shaped holes is mesh cloth. Different mesh fabrics can be woven with different equipment, mainly 2 kinds of organic mesh fabrics and knitted mesh fabrics. Among them, the woven mesh cloth has white weaving or yarn-dyed weaving, as well as jacquard, which can be woven into different patterns. Good air permeability, after bleaching and dyeing, the cloth is very cool. In addition to summer clothing, it is especially suitable for curtains, mosquito nets and other supplies. The mesh cloth can be woven with pure cotton or chemical fiber blended yarn (thread). The whole yarn mesh cloth is generally made of 14.6-13 (40-45 inch) yarn, and the whole line of mesh cloth is made of 13-9.7 double-strand thread (45 inch). /2 ~ 60 British count/2), also with yarn and thread interwoven, which can make the pattern of the cloth more prominent and enhance the appearance effect. There are generally two weaving methods for woven mesh cloth: one is to use two sets of warp yarns (ground warp and twist warp), twist each other to form a shed, and interweave with weft yarns (see leno weave). The twisted warp is to use a special twisted heddle (also known as a half heddle) to be twisted on the left side of the ground warp sometimes. The mesh-shaped holes formed by the interweaving of twist and weft yarns have a stable structure and are called lenos; the other is to use the jacquard weave or the change of the reeding method. Fabric with small holes on the cloth surface, but the mesh structure is unstable and easy to move, so it is also called false leno. There are also two types of knitted mesh fabrics, weft knitted mesh fabrics and warp knitted mesh fabrics. Warp knitted mesh fabrics are generally woven by West German high-speed warp knitting machines, and the raw materials are generally nylon, polyester, spandex, etc., knitted mesh fabrics. The finished products are high elastic mesh cloth, mosquito net cloth, laundry mesh, luggage mesh, hard mesh, sandwich mesh, creekt, embroidered mesh, wedding mesh, square mesh, transparent mesh, American mesh, diamond mesh, jacquard mesh , Lace and other mesh fabrics. https://www.haiwei-hometextile.com/

China Washed Cotton Fabric Exporter Introduces The Selection Knowledge Of Curtain Fabrics China Washed Cotton Fabric Exporter Introduced Color selection requirements for Curtain Fabric: 1. Pink If you install curtains in the living room, choosing pink will make the whole space look more avant-garde and fashionable. It has a warm and romantic feeling and is favored by many young people. When it is used in the living room, it brings a comfortable and romantic sense to people and demonstrates the owner's yearning for a better life. 2. Blue It is also a good choice to use blue curtains in the living room. Blue gives people a sense of tranquility. Matching blue curtains in the living room space is conducive to creating a calm atmosphere of the space, and it can also reflect the owner’s attitude towards quietness. The pursuit of a comfortable life can make the decoration of the entire space look more harmonious. 3. Red The installation of red curtains in the living room is also more pleasing, which can give people a powerful force and look very atmospheric on the whole. The decoration of the whole living room will be more charming, and it can also reflect that the owner is full of enthusiasm for life. 4. Light green If you use light green curtains in the living room, it looks very fresh and elegant on the whole. The use of light green can make the entire space more refreshing and bring vitality to the entire living room space. In this way, an elegant and rich taste of life is displayed on the whole. Through the above introduction, China Pigment Printing Fabric Company hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

Seersucker Fabric Manufacturers Introduces The Strategy Of Using Bronzing Process Seersucker Fabric Manufacturers introduced the characteristics of hot stamping. It is a special printing process that does not require ink. The so-called hot stamping refers to the process of hot stamping electrochemical aluminum foil onto the surface of the substrate under a certain temperature and pressure. The hot stamping machine completes the hot stamping process. equipment. The process is mainly based on the principle of hot-press transfer. Under the action of combined pressure, the anodized aluminum is in contact with the hot stamping plate and the substrate. The hot stamping plate has a certain amount of heat due to the heating of the electric heating plate. The hot-melt dyed resin layer and adhesive are melted by the heating of the anodized aluminum, and the dyed resin layer is viscous. After the special heat-sensitive adhesive melts, the viscosity increases. The aluminum layer and the anodized aluminum base film are peeled off and transferred to the substrate at the same time. As the pressure is removed, the adhesive quickly cools and solidifies, and the aluminum layer firmly adheres to the substrate. Finish a hot stamping process on the top. The process flow of the bronzing machine: bronzing preparation→plate loading→pad plate→determination of bronzing process parameters→trial bronzing→signing sample→formal bronzing. The images and texts printed by anodized aluminum present a strong metallic luster, bright and eye-catching, and never fade. In particular, gold and silver electrochemical aluminum, with its magnificent, exquisite and elegant decoration, embellishes the surface of the printed matter, enhances the artistry of the printed matter, and plays a publicity effect that highlights the theme; its brightness greatly exceeds that of printed gold and silver, making the product It has a high-end feeling and a beautiful enjoyment. At the same time, due to the excellent physical and chemical properties of anodized aluminum, it can protect the printed products, so the hot stamping process is widely used in high-end and exquisite packaging and decoration trademarks, wall calendars, book covers and other printed materials; secondly, anodized aluminum hot stamping The range is very wide, from general book covers, trademark patterns, advertising, plastic products to daily necessities, from paper to leather, cotton, etc.; furthermore, bronzing is a dry processing method, and the workpiece can be packaged and transported immediately after bronzing . Through the above introduction, 3D Embossed Fabric Manufacturers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

Home Textile Fabrics Suppliers Introduces How To Use Fabric Dyeing Home Textile Fabrics Suppliers introduces the process flow of fabric dyeing: ① Preparation of original cloth: preparation of original cloth includes original cloth inspection, cloth turning (batch, box, printing) and seam head. The purpose is to check the quality of the grey fabric. Including the length, width, weight, warp and weft yarn density and density, strength, etc. of the original fabric, as well as spinning defects, weaving defects, various stains and breakages. ② Singeing: Fabric singeing is to quickly pass the fabric through a high-temperature flame or rub it across a red hot metal surface. At this time, the fluff existing on the fabric surface will quickly heat up and burn, and the cloth body is tighter and the temperature rises more. Slow, before reaching the fire point, it has left the flame or red hot metal surface, so as to achieve the purpose of burning off the fluff without operating the fabric. The purpose is to burn off the fluff on the cloth surface to make the cloth surface smooth and beautiful, and to prevent uneven dyeing and printing defects due to the existence of fluff during dyeing and printing. ③ Desizing: For smooth weaving, textile mills often sizing warp yarns to improve strength and wear resistance. The slurry on the grey fabric not only affects the water absorption performance of the fabric, but also affects the quality of dyeing and finishing products, and will increase the consumption of dyeing chemicals. Therefore, the slurry should be removed before scouring. This process is called desizing. The size of the cotton fabric can be removed from the fabric by alkali desizing, enzyme desizing, acid desizing and oxidizing agent desizing. ④ Scouring: When cotton fiber grows, it is accompanied by natural impurities. After desizing, there is still a small amount of slurry and natural impurities still remaining on the fabric. Therefore, the fabric needs to be scoured for a long time in high-temperature concentrated lye to remove residual impurities. Scouring is the use of caustic soda and other scouring aids to chemically react with natural impurities. After washing with water, the impurities are removed from the fabric. ⑤ Bleaching: After the cotton fabric is scoured, there are natural pigments on the fiber, and its appearance is not white enough. If it is used for dyeing or printing, it will affect the vividness of the color. The purpose of bleaching is to remove pigments and give the fabric the necessary and stable whiteness, while the fiber itself is not significantly damaged. Commonly used bleaching methods for cotton fabrics are sodium nitrite method, hydrogen peroxide method and sodium chlorite method. ⑥ Dyeing: refers to the physical or chemical combination of dyes and fibers, or the use of chemical methods to generate pigments on the fibers, so that the entire textile has a certain color. Dyeing is carried out under certain conditions of temperature, time, pH value and required dyeing auxiliaries. ⑦ Mercerizing: refers to the processing process of cotton fabrics under the condition of tension in the warp and weft directions at room temperature or low temperature, treated with concentrated caustic soda solution to improve the properties of the fabric. After mercerizing, be sure to use flushing to remove alkali or steaming to remove alkali, or to remove alkali by washing on the floor, etc., until the fabric is neutral. ⑧ Finishing: A textile technology project that gives clothing fabrics wearability and beautiful appearance. Through the above introduction, Dyeing Fabric Suppliers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/

Home Textile Fabrics Suppliers Introduces The Quality Identification Skills Of Fabrics Home Textile Fabrics Suppliers introduces the quality identification methods of fabrics: (1) High-end fabrics made of high-count and high-density mercerized pure cotton fabrics: pure natural fibers, full, crisp, smooth and soft, thick and delicate, without any irritation in contact with the skin, moisture absorption, good air permeability, and no static electricity. The human body is good and harmless. The appearance feels high-end and luxurious (the use of such products makes people feel worth double). (2) Low-grade fabrics, poor-quality fabrics feel loose, rough, hairy, hard, thin and vulgar, and have a strange feeling in contact with the skin. (Most of the lower-priced bedding products on the market have this feeling). (Using this type of product makes people feel less expensive). (3) The silk-cotton fabric is interwoven with high-count pure cotton and silk: pure natural fiber, soft, plump, smooth, delicate, bright, comfortable in contact with the skin, without any irritation, and various properties are better than pure cotton . The appearance feels high-end, luxurious and luxurious. The natural silk in the silk-cotton fabric has the effects of eliminating black skin, curing skin diseases, and making the skin beautiful. Modern medicine proves that the special sericin SERICIN contained in natural silk has protective effects such as anti-allergic and skin-friendly properties. Because silk is a porous fiber, it keeps warm, dry and has excellent air permeability. Through the above introduction, Dyeing Fabric Suppliers hopes that you can simply refer to the content of this article in future use. https://www.haiwei-hometextile.com/